CPF-3002 FLEXIBLE 3000 Amp current probe

* Meet IEC 1010 CAT III 1000 V safety requirement.     

* Double insulation coil.

* Range : 30 A/300 A/3000 A.

* Output sensitivity : 100 mV/A, 10 mV/A, 1 mV/A.

* Output voltage : 3 ACV ( 30 A, 300 A, 3000 A ).

* Measuring range LED indication.

* Flexible probe length : 280 mm ( 11 inch ).

* When change the new probe, the calibration procedures are not necessary to be executed.

* Uses durable, long-lasting components, enclosed in strong, light weight ABS-plastic housing.

Measurement

30 A/300 A/3000 A, 3 ranges, push switch selectable

   1st range value : 30 A

   2nd range value : 300 A

   3rd range value : 3000 A

Output sensitivity 

100 mV/A, 10 mV/A, 1 mV/A, AC coupled.

Flexible Cable length

 280 mm

Flexible Cable Diameter

8 mm

Accuracy

± 1% of range value

* Accuracy is specified that the measured conductor's position is on the center of " Flexible current probe ".

* 50/60 Hz.

* 23 ± 5 ℃

Frequency range 

45 to 400 Hz. * Accuracy tested under 50/60 Hz.

Linearity

± 0.2% of reading value. * From 10% to 100% of range value.

Conductor position sensitivity

± 2% of reading value

* The measured conductor  distance from center> 25mm (1" )

External field influence

Increase ± 1.5% of range value max.

* Recommend the distance between different " Flexible current probe "  should > 200mm

Phase error   

<± 1.5%    * 50/60 Hz

Minimum load

 100 K ohm for specified accuracy.

Operating temperature

 0 ℃ to 50 ℃ (32 ℉ to 122 ℉)   

Operating humidity 

Max. 80% RH.

Power supply

1. DC 1.5 V battery ( UM-4, AAA ) x 2 PCs

2.AC to DC 9V power adapter ( optional ).

3.Power supply from the meter ( DW-6093, DW-6095 ) via Power interface cable, PWCB-06 ( included ). Power supply voltage from DW-6093, DW-6095 is DC 8V± 1V.

Power  consumption

Approx. DC 6.1 mA.

Dimension

290 x138.3 x 26.5 mm 

( 11.4x 5.4 x 1.0 inch ).

Weight

183 g/0.404 LB ( w/o battery ).

Accessory included 

Operating Manual..........................1 PC