CP-200 200 A CURRENT PROBE
AC mV output, 20 A/200 A, 10 mV/A, 1mV/A
For 3 phase power analyzer DW-6093, DW-6095 200 A
CURRENT PROBE
Model : CP-200 ISO-9001, CE, IEC1010
FEATURES
* Range : 20 A/200 A. |
* Output sensitivity : 10 mV/A, 1 mV/A. |
* Output voltage : 200 ACmV ( 20 A, 200 A ). |
* Max. conductor size : 19 mm ( 0.75 inch ) Dia. |
* Operation frequency : 50 Hz/60 Hz. |
* Optional current probe for DW-6093, DW-6095. |
* When change the new probe, the calibration procedures are not necessary to be executed. |
* Signal output use the banana plugs, durable and safety. |
SPECIFICATIONS
Measurement ranges | 20 A/200 A, switch selectable |
Output sensitivity | 10 mV/A, 1 mV/A, AC coupled. |
Accuracy | ± 1% F.S. * F.S. : Full scale of range. * 50/60 Hz.. * 23 ± 5 ℃ |
Frequency range | 45 to 400 Hz. * Accuracy tested under 50/60 Hz. |
Phase error | < ± 1° * 50/60 Hz. |
Minimum load | 100 K ohm for specified accuracy. |
Enclosure material | UL 94-V0 rated. |
Safety | IEC 1010, Categories III 600V. |
Power Supply | Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary. * Power supply voltage from DW-6093, D W - 6095 is DC 8V ± 1V .. |
Max. Jaw Open Size | 19 mm ( 0.75 inch ) Dia. |
Operating Temperature | 0℃ to 50 ℃( 32℉ to 122 ℉). |
Operating Humidity | Less than 80% RH. |
Dimension | 179.9 X 66.9 X 40.1 mm. ( 7.0 x 2.6 x 1.57 inch ) |
Cable length : 4 meters ( 13.1 feet ). | |
Weight | 330 g ( 0.73 LB ). |
Accessory Included | Operating manual ....................1 PC. |
FRONT PANEL DESCRIPTIONS