DL-9954 ACA LEAKAGE TESTER
Precision ACA leakage current, True RMS
ACA LEAKAGE TESTER
Model : DL-9954 ISO-9001, CE, IEC1010
FEATURES
* High precision AC mA measurement, it is useful for AC mA leakage current measurement. |
* Measure AC mA on the inductive conductor. |
* Design meet IEC 1010 CATIII 600V safety requirement. |
* 4000 counts, auto range and multi-functions. |
* Measurement for ACA, ACV, DCV, Ohms, Diode, Continuity beeper. |
* True RMS measuring reading for ACV and ACA function. |
* Two AC leakage current range : 40 mA, 400 mA . |
* Two AC current range : 40 A, 120 A. |
* Data hold. |
* Relative measurement. |
* Crystal time base, high quality. |
* LCD display allows clear readout-out even at high ambient light level. |
* LSI circuit provides high reliability and durability. |
* Overload protection circuit is provided for all range. |
* Compact & heavy duty ABS housing fireproof plastic case. |
GENERAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS (23±5 ℃ )
Function | Range | Resolution | Accuracy | Overload Protection |
DCV
ACV ( true rms ) | 400 mV DC only | 0.1 mV | ± ( 0.5 % + 2d ) | AC/DC 600V |
4 V | 0.001V | DCV : ± ( 1 % + 2d ) ACV : ± ( 1.2 % + 5d ) | ||
40 V | 0.01V | |||
400 V | 0.1 V | |||
600 V | 1 V | |||
ACA Leakage ( true rms ) 0.1 to 400 mA | 40 mA | 0.01mA |
± ( 1.5 % + 3d ) | AC 120 A |
400 mA | 0.1mA | |||
ACA ( true rms ) 0.01 to 120 A
| 0 to 39.99 A | 0.01 A | ± ( 1.5 % + 3d ) | |
40 to 100 A | 0.1 A | |||
100.0 to 120 A | 0.1 A | ± ( 3 % + 3d ) | ||
Remark | * True RMS measuring reading for ACV and ACA function. * Input impedance for ACV & DCV range is 10 Meg ohm. * ACA , ACV frequency response is from 40 to 1 KHz. * ACA , ACV specification be tested on sine wave 50 / 60 Hz. |
Function | Range | Resolution | Accuracy | Overload Protection |
Ohms | 400 ohm | 0.1 ohm |
± ( 1 % + 5d ) |
AC / DC 400 V |
4 K ohm | 1 ohm | |||
40 K ohm | 10 ohm | |||
400 K ohm | 100 ohm | |||
4 M ohm | 1 K ohm | ± ( 2 % + 2d ) | ||
40 M ohm | 10Kohm | ± ( 3.5 % + 5d ) | ||
Diode | Short/non conductance, good/defect test. | |||
Continuity | If measuring resistance is less than 10 ohm, the beeper will sound . |