CP-2000 2000 A CURRENT PROBE
20 A/200 A/2000 A, 100 mV/A, 10 mV/A, 1 mV/A
For 3 phase power analyzer DW-6093, DW-6095
2000 A CURRENT PROBE
Model : CP-2000 ISO-9001, CE, IEC1010FEATURES
* Range : 20 A/200 A/2000 A. |
* Output sensitivity : 100 mV/A, 10 mV/A, 1 mV/A. |
* Output voltage : 2 ACV ( 20 A, 200 A, 2000 A ). |
* Max. conductor size : 51 mm ( 2.1 inch ) Dia. |
* Operation frequency : 50 Hz/60 Hz. |
* Optional current probe for DW-6093, DW-6095. |
* When change the new probe, the calibration procedures are not necessary to be executed. |
* Signal output use the banana plugs, durable and safety. |
* Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary. |
SPECIFICATIONS
Measurement ranges | 20 A/200 A/2000 A, switch selectable |
Output sensitivity | 100 mV/A, 10 mV/A, 1 mV/A, AC coupled. |
Accuracy | ± 1% F.S. * F.S. : Full scale of range. * 50/60 Hz.. * 2 3 ± 5 ℃ |
Frequency range | 45 to 400 Hz. * Accuracy tested under 50/60 Hz. |
Phase error | < ± 1° * 50/60 Hz.. |
Minimum load | 100 K ohm for specified accuracy. |
Enclosure material | UL 94-V0 rated. |
Safety | IEC 1010, Categories III 600V. |
Power Supply | Power supply is from the meter (DW-6093, DW-6095 ), battery is not necessary. * Power supply voltage from DW-6093, D W - 6095 is DC 8V ± 1V .. |
Max. Jaw Open Size | 51 mm ( 2.1 inch ) Dia. |
Operating Temperature | 0 ℃ to 50 ℃( 32 ℉ to 122 ℉). |
Operating Humidity | Less than 80% RH. |
Dimension | 240.8 x 90.9 x 38.3 mm. ( 9.48 x 3.58 x 1.5 inch ). |
Cable length : 4 meters ( 13.17 feet ). | |
DC plug size : 5.5 mm x 2.5 mm DIA. | |
Weight | 586 g ( 1.29 LB ). |
Accessory Included | Operating manual ....................1 PC. |
FRONT PANEL DESCRIPTIONS