SD card real time data recorder with harmonic measurement
3 PHASE POWER ANALYZER
Model : DW-6095  ISO-9001, CE, IEC1010

FEATURES 

* Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W.

* 3 current probes ( CP-1201 ) are included, if change the current probes, the calibration

   procedures are not necessary.

* Current probe input signal/ranges with selection :

   Input signal (ACV) : 200 mV/300 mV/500 mV/1 V/2 V/3 V.

   Ranges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A.

* Meter can cooperate the universal current probes.

* Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe ( CP 1201 ), AC to DC 9V adapter, 2 G SD memory card and Carrying bag.

* Measurement : 

   V (phase-to-phase), V (phase-to-ground)

   A (phase-to-ground)

   KW / KVA / KVAR / PF (phase)

   KW / KVA / KVAR / PF (system)

   KWH / KVAH / KVARH / PFH (system)

   Phase angle

* Harmonics display (1-50th order).

* Simultaneous display of Harmonics and Wave form.

* Display of Waveform with Peak Values.

* Analysis of Total Harmonic Distortion ( THD ).

* Graphic Phase diagram with 3-Phase system parameters.

* 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor.

* Calculated Unbalanced Current through Neutral Line ( An )

* Capture Transient events (including Dip, Swell and Outage ) with programmable threshold ( % ).

* Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to 1000 ).

* ACV input impedance is 10 Mega ohms.

* Safety Standard : IEC 1010, CAT III 600V.

* Built-in clock and Calendar, real time data record with SD memory card , sampling time set from

   2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the

   measured value with the time information ( year, month, data, hour, minute, second ) to the

   Excel directly, then user can make the further data analysis by themselves.

* Powered by AA ( UM-3 ) DC 1.5 V X 8 batteries ( Alkaline type ) or DC 9V adapter.

* Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02

   and Data Acquisition software, SW-811.

* Optional current probes : CP-1201, CP-2000, CP-200, CP-3000, detail specification.

* User can order the meter only ( without the current probes ) with the special request as intend to

   cooperate their own current probes.

* Patented.

GENERAL SPECIFICATIONS:

ELECTRICAL SPECIFICATIONS: