PS-9302 PRESSURE METER

商品介紹PRESSURE METERPS-9302 PRESSURE METER

=sprice_block=

PRESSURE METER
Model : PS-9302 ISO-9001, CE, IEC1010

FEATURES

Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new calibration are not necessary when change the new sensor.
When change the new pressure sensor, just select pressure type ( 2, 5, 10, 20, 50, 100, 400 bar ) on the front panel button. The sensor type will memorize into the circuit permanently by EEPROM.
8 kind pressure units ( bar, psi, Kg/cm2 mm/Hg, inch/Hg, meter/H20, inch/H20, Atmosphere ) select by push button on the front panel.
Optional full line presssure sensor ( 2, 5, 10, 20, 50, 100, 400 bar ) are available.
Auto shut off saves battery life.
4 pin DIN socket, 2 pins to provide DC 5 V exciting voltage ( power supply ) to pressure transducer, another two pins for accept transducer signal of 100mV full scale.
Zero button on the front panel, easy adjust the zero value of pressure sensor.
Push button gain adjustment, usage for calibration precisely if necessary.
Separate pressure sensor, easy operation. & remote measurement.
Microprocessor circuit assures maximum possible accuracy, provides special functions and features.
Super large LCD display with contrast adjustment for best viewing angle.
Records maximum & minimum readings with recall.
Data Hold function for stored the desired value on display.
Built-in low battery indicator.
RS232/USB PC serial interface, can match the personal computer used as the Data Logger, Pressure Recorder.... and other mordern pressure measuring system.

GENERAL SPECIFICATIONS
Circuit	Microprocessor LSI circuit.	Data output	RS 232/USB PC serial interface.
Display	61 mm x 34 mm supper large LCD display. 15 mm ( 0.6" ) digit size.	Sampling time	Approx. 0.8 second.
Display units	bar, psi, Kg/cm^2, mm/Hg, inch Hg, meter H20 inch H20, Atmosphere.	Power off	Auto shut off, saves battery life, or manual off by push button.
Accuracy	± ( 0.5% + 1 d ) ∗ Under the signal from the sensor is at full scale ( 100 mV ). ∗ Meter only. ∗ Within 23 ℃± 5 ℃	Operating temperature	0 to 50 ℃ ( 32 to 122 ℉ ).
Pressure transducer	Optional, exciting voltage DC 5V, Sensor max. range output is DC 100 mV.	Operating humidity	Less than 80% R.H.
Zero adjust	Push button on the front panel.	Power supply	006P DC 9V battery(heavy duty).
Span adjust	Push button gain adjustment, usage for calibration precisely if necessary.	Power current	Approx. DC 8.5 mA.
Transducer mV input signal	Approx 100 mV (Full Scale).	Weight	345 g/0.76 LB
Exciting output power supply	DC 5 V.	Dimension	180 x 72 x 32 mm ( 7.1 x 2.8 x 1.3 inch ).
Data hold	By push button.	Accessories included	∗ Instruction manual.........................1 PC
Data record	Record maximun & mininum readings.	Optional accessories	∗ Pressure sensor, PS100-xxBAR refer to the bottom description. ∗ Hard carrying case ( CA-06 ). ∗ Data acquisition software, SW-U801-WIN. ∗ RS232 cable, UPCB-01 ∗ USB cable, USB-01

APPLICATIONS

PRESSURE SENSOR

Model : PS100-XXBAR

Description

Optional, pressure sensor that cooperate with PS-9302.
Out put : 100 mV DC for full scale.
4 pin DIN plug, 2 pins to accept DC 5 V exciting voltage(power supply) for pressure transducer, another two pins for output signal of 100mV full scale.
Size : 30 mm dia. x 85 mm. Weight : 160 g.
Pressure Port Connector : PS 1/4" ( 19 teeth per inch ) or 1/4" NPT
∗ Included one adapter connector that convert the 1/4" NPT to 1/4 " PS.