RT-608 3 PHASE & MOTOR ROTATION TESTER
PHASE &
MOTOR ROTATION TESTER
Model : RT-608 ISO-9001, CE, IEC1010
SPECIFICATIONS | |
Function | 2 in 1 ( 3 PHASE ROTATION TESTER & MOTOR ROTATION FIELD TESTER ). 3 PHASE ROTATION TESTER : To display the phase sequence of 3 phase power system. MOTOR ROTATION FIELD TESTER : To make the determination the rotation field of unconnected motor. |
Power Supply | 006P DC 9 V battery |
Power | 3 phase rotation tester : 7 mA |
Consumption | Motor rotation field tester : 14 mA |
Circuit Structure | Electronic ( not mechanical ). |
Size | 150 x 85 x 40 mm ( 5.9 x 3.4 x 1.6 inch ). |
Weight | 230g/0.5 LB ( w/o battery ) |
Accessories Included | Operation manual................................................... 1 PC. Included Rubber alligator clip with banana plug ( red / white / black wire )....................................... 3 PCs. |
Operating procedures for MOTOR ROTATION FIELD TESTER
- Plug in the " black wire "," red wire ", " white wire " banana plug into the L1, L2, L3 terminals.
- Clamp the alligator clips on to the input power wire of the tested motor(there must be no voltage present).
- Push the green operation button, then the correct phasing is ascertained by rotating the motor shaft.
3 PHASE ROTATION TESTER | |||||||||||||||||||||||
Signal Input | 100 V AC up to 660 V AC max. | ||||||||||||||||||||||
Voltage | 3 min. limit for over 500 V AC. | ||||||||||||||||||||||
Signal Current Consumption | mA at 500 V AC. | ||||||||||||||||||||||
OPERATING INDICATOR INSTRUCTION :
|