PS-9302 PRESSURE METER
PRESSURE METER
Model : PS-9302 ISO-9001, CE, IEC1010
FEATURES
- Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar sensor, new calibration are not necessary when change the new sensor.
- When change the new pressure sensor, just select pressure type ( 2, 5, 10, 20, 50, 100, 400 bar ) on the front panel button. The sensor type will memorize into the circuit permanently by EEPROM.
- 8 kind pressure units ( bar, psi, Kg/cm2 mm/Hg, inch/Hg, meter/H20, inch/H20, Atmosphere ) select by push button on the front panel.
- Optional full line presssure sensor ( 2, 5, 10, 20, 50, 100, 400 bar ) are available.
- Auto shut off saves battery life.
- 4 pin DIN socket, 2 pins to provide DC 5 V exciting voltage ( power supply ) to pressure transducer, another two pins for accept transducer signal of 100mV full scale.
- Zero button on the front panel, easy adjust the zero value of pressure sensor.
- Push button gain adjustment, usage for calibration precisely if necessary.
- Separate pressure sensor, easy operation. & remote measurement.
- Microprocessor circuit assures maximum possible accuracy, provides special functions and features.
- Super large LCD display with contrast adjustment for best viewing angle.
- Records maximum & minimum readings with recall.
- Data Hold function for stored the desired value on display.
- Built-in low battery indicator.
- RS232/USB PC serial interface, can match the personal computer used as the Data Logger, Pressure Recorder.... and other mordern pressure measuring system.
GENERAL SPECIFICATIONS | |||
Circuit | Microprocessor LSI circuit. | Data output | RS 232/USB PC serial interface. |
Display | 61 mm x 34 mm supper large LCD display. 15 mm ( 0.6" ) digit size. | Sampling time | Approx. 0.8 second. |
Display units | bar, psi, Kg/cm^2, mm/Hg, inch Hg, meter H20 inch H20, Atmosphere. | Power off | Auto shut off, saves battery life, or manual off by push button. |
Accuracy | ± ( 0.5% + 1 d ) ∗ Under the signal from the sensor is at full scale ( 100 mV ). ∗ Meter only. ∗ Within 23 ℃± 5 ℃ | Operating temperature | 0 to 50 ℃ ( 32 to 122 ℉ ). |
Pressure transducer | Optional, exciting voltage DC 5V, Sensor max. range output is DC 100 mV. | Operating humidity | Less than 80% R.H. |
Zero adjust | Push button on the front panel. | Power supply | 006P DC 9V battery(heavy duty). |
Span adjust | Push button gain adjustment, usage for calibration precisely if necessary. | Power current | Approx. DC 8.5 mA. |
Transducer mV input signal | Approx 100 mV (Full Scale). | Weight | 345 g/0.76 LB |
Exciting output power supply | DC 5 V. | Dimension | 180 x 72 x 32 mm ( 7.1 x 2.8 x 1.3 inch ). |
Data hold | By push button. | Accessories included | ∗ Instruction manual.........................1 PC |
Data record | Record maximun & mininum readings. | Optional accessories | ∗ Pressure sensor, PS100-xxBAR refer to the bottom description. ∗ Hard carrying case ( CA-06 ). ∗ Data acquisition software, SW-U801-WIN. ∗ RS232 cable, UPCB-01 ∗ USB cable, USB-01 |
APPLICATIONS
- Measure Pneumatic Pressures.
- Measure Automobile Engine Vacuum Pressures.
- Pressure for Super Heat Measurements.
- Hydraulic Servo controls.
- Air conditioning.
- Food Processing.
- Refrigeration.
PRESSURE SENSOR
Model : PS100-XXBAR
Description
- Optional, pressure sensor that cooperate with PS-9302.
- Out put : 100 mV DC for full scale.
- 4 pin DIN plug, 2 pins to accept DC 5 V exciting voltage(power supply) for pressure transducer, another two pins for output signal of 100mV full scale.
- Size : 30 mm dia. x 85 mm. Weight : 160 g.
- Pressure Port Connector : PS 1/4" ( 19 teeth per inch ) or 1/4" NPT
∗ Included one adapter connector that convert the 1/4" NPT to 1/4 " PS.
Model | 2 bar sensor | PS100-2BAR |
5 bar sensor | PS100-5BAR | |
10 bar sensor | PS100-10BAR | |
20 bar sensor | PS100-20BAR | |
50 bar sensor | PS100-50BAR | |
100 bar sensor | PS100-100BAR | |
400 bar sensor | PS100-400BAR |